Dinamic Routing (Tugas 2 Jarkom2)

G tau mau nulis apa buat kata-kata Pembuka, Pokoknya ini cuma contoh dinamic Routing dengan 3 Router Jadi Langsung aja chek it dot langkah-langkahnya:

v 

    Seting Router 0

Router>ena

Router#conf t

 Router(config)#hostname Router0

Ø Setting Interface fa 0/0

Router0(config)#int fa 0/0

                       Router0(config-if)#ip add 10.1.0.1 255.255.0.0

                          Router0(config-if)#no shutdown

                              Router0(config-if)#exit

Ø Setting Interface se  1/0

Router0(config)#int se 1/0

                       Route0(config-if)#ip add 10.2.0.2  255.255.0.0

                          Router0(config-if)#no shutdown

                              Router0(config-if)#exit

Ø Seting dynamic Routing

Router0(config)#router rip

                       Router0(config-router)#ver 2

                           Router0(config-router)#network 10.0.0.0

vSetting Router 1

Router>ena

Router#conf t

Router(config)#hostname Router1

ØSetting Interface se 0/0

Router1(config)#int se 0/0

                       Router1(config-if)#ip add 10.2.0.1 255.255.0.0

                          Router1(config-if)#clock rate 64000

                              Router1(config-if)#no shutdown

                                  Router1(config-if)#exit

ØSetting Interface se  1/0

Router1(config)#int se 1/0

                       Router1(config-if)#ip add 10.3.0.1 255.255.0.0

                          Router1(config-if)#clock rate 64000

                              Router1(config-if)#no shutdown

                                  Router1(config-if)#exit

Ø  Seting dynamic Routing

Router1(config)#router rip

                       Router1(config-router)#ver 2

                           Router1(config-router)#network 10.0.0.0

v    Seting Router 2

Router>ena

Router#conf t

Router(config)#hostname Router2

Ø Setting Interface se  1/0

Router2(config)#int se 1/0

                       Router2(config-if)#ip add 10.3.0.2  255.255.0.0

                          Router2(config-if)#no shutdown

                              Router2(config-if)#exit

Ø Setting Interface fa 0/0

Router2(config)#int fa 0/0

                       Router2(config-if)#ip add 10.4.0.1 255.255.0.0

                          Router2(config-if)#no shutdown

                              Router2(config-if)#exit

Ø Seting dynamic Routig

Router2(config)#router rip

                       Router2(config-router)#ver 2

                           Router(config-router)#network 10.0.0.0

untuk lebih lengkap silahkan download filenya : Download